Residential · Los Angeles, CA
Driveway Pressure Washing in Los Angeles
The first thing people see. Make it clean.
Call (424) 324-3888The service
Driveway Cleaning
What does driveway cleaning remove?
Driveway cleaning removes oil and fluid drips, tire marks, leaf staining and the blotchy grey that builds up in concrete over time. The result is a slab and garage apron with one even tone. Deep, set-in oil may lighten rather than disappear completely.
Driveways and front walks take the heaviest daily wear: tire marks, oil drips, leaf stains, and the general grey that settles into concrete. Pressure washing with a surface cleaner gives an even, consistent finish across the whole slab.
Concrete is pre-treated where staining calls for it, then cleaned with a rotary surface cleaner for even results, followed by edge detailing and rinse. Some deep oil stains may lighten rather than disappear fully.
Problems addressed
- Oil and fluid drips
- Tire marks
- Leaf and organic staining
- Uneven, blotchy concrete tone
Surfaces
- Broom-finish concrete
- Exposed aggregate
- Sidewalks and front walks
- Garage aprons
Property types
- Single-family homes
- HOA driveways
- Shared walkways
What driveway cleaning removes
Driveway cleaning lifts oil and fluid drips left by parked vehicles, tire marks from regular use, and the leaf and organic staining that builds up along edges and under trees. It also evens out the blotchy, inconsistent color that develops across a slab as different areas weather at different rates, and clears grime from expansion joints and control lines.
What cleaning can't fix
Cleaning can't reverse etching caused by deicing salts, battery acid, or strong chemicals that have eaten into the concrete surface. Cracks, spalling, and settling are structural issues no amount of washing will fix, and some oil stains that have sat for years and penetrated deep into the pores of the concrete will lighten but not fully vanish. If a sealer has already failed and is peeling, washing may lift more of it rather than restore the look.
How we do it, and why this method
Driveways are cleaned with a rotary surface cleaner, a tool that spins two or more jets beneath a covered housing to apply consistent pressure across the whole slab. This matters because a single wand, worked by hand, naturally leaves overlapping arcs and streak marks — fine for small areas but obvious across a wide driveway. The surface cleaner solves that by distributing pressure evenly as it passes.
Before that pass happens, stained areas get pre-treated so the cleaner isn't relying on raw pressure alone to break down oil or organic buildup. Edges, corners, and spots the surface cleaner can't reach — like against garage doors or along narrow strips — are detailed afterward with a handheld wand. The combination gets a driveway to a uniform, consistent finish rather than a patchwork of clean and dirty spots.
Weather also plays a role in sequencing — cleaning on a day when the slab can dry evenly helps avoid water sitting in low spots and re-depositing fine sediment as it evaporates.
What affects the cost
- Total square footage of the driveway is the biggest factor in how long the job takes.
- The number and severity of oil or fluid stains changes how much pre-treatment is needed.
- Exposed aggregate and stamped or decorative concrete take more care than plain broom-finish slabs.
- Heavy organic staining from overhanging trees adds treatment time beyond a standard pass.
- Edges, cracks, and tight spots around landscaping require extra hand-detailing time.
- Combining driveway cleaning with adjoining walkways in the same visit is typically more efficient than separate trips.
More detail: pressure washing cost in Los Angeles.
When to schedule
A driveway is a good candidate for cleaning whenever staining starts to stand out against the surrounding concrete, which for most households is at least once a year. Scheduling before sealing or resurfacing work is also worth doing, since sealers bond better to a clean surface. If you're preparing a home for sale or a big outdoor gathering, cleaning a week or so ahead gives enough time for drying and any touch-ups.
What to expect on the day
Vehicles will need to be moved off the driveway before work starts, along with any items stored along the edges. The crew connects to a water source, pre-treats visible stains, and then runs the surface cleaner across the slab in overlapping passes, finishing with hand detailing at edges and corners. The surface will be wet and can stay slick for a short period, so it's worth keeping foot traffic off it until it dries.
Before and after from our crews
Real jobs, photographed by our team. Dates come from the original photo files.
Driveway cleaning · Nov 2025 · Company work
Questions
Driveway Cleaning FAQ
Will pressure washing remove oil stains?
Fresh and moderate oil stains often lift significantly. Old, deeply absorbed stains may lighten but not disappear entirely.
Do you clean sidewalks too?
Yes — sidewalks and walkways are commonly cleaned together with the driveway.
How long before I can park on the driveway again?
Concrete dries fairly quickly in open air, usually within a few hours, though full drying can take longer in shaded or humid conditions.
Does sealing come with driveway cleaning?
No, sealing is a separate step. Cleaning prepares the surface, but sealing itself has to be discussed and scheduled on its own.
Can you clean a driveway with a crack running through it?
Yes, cracked concrete can still be cleaned, though the crack itself won't be repaired or hidden by washing.
What about the apron where the driveway meets the street?
That section is typically included since it's part of the same continuous concrete surface.
Related services
Where we offer driveway cleaning
Ready for a cleaner property?
Tell us what needs cleaning and where the property is located.